Breaking News
Loading...
Selasa, 12 Maret 2013

Konfigurasi Router RIP Di Cisco Packet Tracer

Untuk tutorial kali ini saya akan konfigurasi router rip di cisco packet tracer,
menggunakan 3 router , switch dan 3 PC / Client..


 




Langkah pertama Kita beri IP Address pada  ke tiga PC :
Pemberian IP Address Pada PC 1, 

 
Pemberian IP Address Pada PC 2,



Pemberian IP Address Pada PC 3, 


Setelah selesai pemberian IP Address pada ke tiga PC, selanjutnya kita setting router 1 , router 2 dan router 3 (Pemberian IP Address)..




klik Router 1 dan setelah itu masuk pada menu CLI


Continue with configuration dialog? [yes/no]: no

Press RETURN to get started!



Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip address 172.16.20.2 255.255.0.0
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int se2/0
Router(config-if)#ip address 10.10.1.1 255.0.0.0
Router(config-if)#band 125
Router(config-if)#cl ra 125000
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit

Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration...
[OK]

Konfigurasi RIP pada Router 1

Router(config)#route rip
Router(config-router)#net 172.16.20.2
Router(config-router)#net 10.10.1.1
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration...
[OK]
Router#


Sekarang  kita lanjutkan setting Router 2

Continue with configuration dialog? [yes/no]: no


Press RETURN to get started!


Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip address 11.10.11.1 255.0.0.0
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int se2/0
Router(config-if)#ip address 10.10.1.2 255.0.0.0
Router(config-if)#band 125
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit

Router(config-if)#exit
Router(config)#int se3/0
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#band 125
Router(config-if)#cl ra 125000
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration...
[OK]
Router#
 
Konfigurasi RIP pada Router 2

Router(config)#route rip
Router(config-router)#net 11.10.11.1
Router(config-router)#net 10.10.1.2
Router(config-router)#net 192.168.1.1
Router(config-router)#exit
Router(config)#ext
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration...
[OK]
Router#


Dan yang terakhir kita setting Router 3


Continue with configuration dialog? [yes/no]: no

Press RETURN to get started!


Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip address 172.16.29.2 255.255.0.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int se2/0
Router(config-if)#ip address 192.168.1.2 255.255.255.0
Router(config-if)#band 125
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration...
[OK]
Router#

 Konfigurasi RIP pada Router 3

Router(config)#route rip

Router(config-router)#net 172.16.29.2
Router(config-router)#net 192.168.1.2
Router(config-router)#ex
Router(config)#ex
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration...
[OK]
Router#


Setelah selesai semua sekarang anda coba PING dari PC 1 ke PC 2 dan PC 3 atau PING dari PC sebaliknya ..


Selamat mencoba, semoga berhasil.

0 komentar:

Poskan Komentar

PERATURAN DALAM BERKOMENTAR:

- TIDAK boleh SPAM.
- Juga TIDAK diperbolehkan SARA.
- Ketika berkomentar, diharapkan memasukkan NAMA dan ALAMAT WEBSITE anda "Name/URL" (Jika tidak punya Google Account).